|
| |
Our product range consists of the following :-
- Marine Magnetometers
-
- Our new MX500 Digital magnetometer is a low cost proton
magnetometer designed specifically for locating small targets in water
up to 70 meters deep. It is ideal for locating anchors, dredge
pipes, mooring chain, cannon etc. Larger objects like steel shipwrecks
can also be detected at distances up to 300 meters. A
completely new design, the MX500 Digital magnetometer was extensively sea trailed for 12 months before product release. The
new design uses the
latest ultra low power microprocessor to create an active tow-fish
with all the magnetometer electronics built into the fish. An integral
depth sensor is fitted as standard so the height of the tow-fish
above the seabed can be seen at all times. The complete magnetometer
consists of a tow-fish which can be supplied with various lengths of
cable up to 150 meters, a control unit which interfaces the tow-fish,
GPS and Depth Sounder to a PC and the MXSurveyII display software which runs
on standard PC or laptop. The PC software is a complete survey
package with data logging of the boat's position, tow-fish depth,
seabed depth, and magnetic deviation.
-
- Recently introduced is the MX500 Digital,
Dual Sensor magnetometer, which runs two tow-fish simultaneously. The
dual tow-fish can either be towed side by side for greater detection range, or inline.
-
- For more information click on the Magnetometers
button on the left.
-
- Diver's Underwater Metal Detector
-
To complement our magnetometer range we have developed a handheld
diver's metal detector, called the Micro-Pulse. This compact detector
with its folding head, is easily carried on a dive, but is small enough to allow it
to be stowed away when the diver needs both hands free to dig out a find. Pulse Induction technology
is at the heart of the Micro-Pulse which makes it very sensitive for locating
all types of buried metal objects.
-
The Micro-Pulse uses the same ultra
low power microprocessor that is used in our MX500 Digital
magnetometer and has enabled us to pack all the electronics
and rechargeable batteries into the handle of the detector. Further
more, the design
utilizes our unique vibrating handle to indicate the presence of metal directly below the search head and removes the
need for cumbersome headphones or external battery packs. Ideal for commercial
divers operating in low visibility, the Micro-Pulse is a very practical solution for a
handheld underwater metal detector.
- For more information click on the Metal
Detector button on the left.
-
- Accessories
-
We offer a range of accessories designed by us to solve common
problems encountered when conducting a magnetic survey. Our
unique design of lead cable weights provide the down force needed to
force the tow-fish deeper while introducing minimum drag. We can
supply our own tried and tested design of depth depressor, which when
attached to the magnetometer cable just ahead of the tow-fish, creates
a down force proportional to the speed of the boat.
|
